HBQ-06X series pull force tester is a special tensile testing machine. It is used to measure the pull off force of wires, welding terminals and seals. The machine adopts an embedded control system, which endows it with remarkable stability and accuracy. It can meet the requirements of networking equipment in modern factories, facilitating the formation of networks.
● Automatic reset: The automatic reset conditions can be set, and it will automatically reset after the terminal is pulled off;
● System settings: It is convenient to set system parameters such as test upper and lower limits, calibration, and pull off conditions;
● Force limit restriction: Alarm prompts when the test force value exceeds the set upper and lower limits;
● Unit conversion: Quick conversion between kg and N units, which can be set to be enabled at startup;
● Communication connection: It can send instructions to control the testing machine through serial port/network port (411), return peak tension values, and also enable data interaction to return text data or import into the MES(optional) system (Communication protocol is open);
● Data display: It can simultaneously display real-time tension and peak tension;
● Data processing: Testing data can be recorded, transmitted, and cleared, facilitating data processing.
Feature ● Wire cutting, single (or double) end stripping, single (or double) end crimping, single end insertion of heat-shrink tub and heating, single end sleeve inserting machine ● The entire machine supports customisation across multiple aspects, including cutting and stripping lengths. ● Optional crimping force monitor equipment（CFM） and visual inspection equipment
Feature ● Functions: Wire cutting, single/double-ended stripping, single/double/parallel-ended crimping, single/double/parallel heat-shrink tubing application. ● The entire machine supports customisation across multiple aspects, including cutting and stripping lengths. ● Optional crimping force monitor equipment（CFM） and visual inspection equipment
Feature ● Equipped with high-precision servo motors for cutting and stripping mechanisms, the system delivers exceptional accuracy and consistency in wire processing operations. The positive and negative screw structure cutting blade ensures precise stripping results, while the robust ductile iron crimping mechanism provides stable crimping height and superior rigidity for reliable terminal connections. ● Featuring an intuitive color touchscreen interface with comprehensive program memory functions, the machine enables rapid product changeover through one-key parameter recall. The modular design allows individual function modules to be activated or deactivated as needed, maximizing production flexibility and equipment utilization across different product lines and manufacturing requirements.
Feature ● Maximum Rubber Sleeve Size: Diameter 30mm, Thickness 20mm, Square 30*30*20mm. ● Production Efficiency: Average 5 seconds/hole, slight differences may occur due to thread length and plastic shell positioning. ● Needle assembly changeover: 3 minutes; tube assembly changeover: 3 minutes; claw assembly changeover: 9 minutes. ● High production efficiency, saving 2-5 people and reducing manual labor intensity. ● High equipment compatibility; can achieve threading of various rubber sleeves through changeover, changeover time 15 minutes. ● High safety performance; multi-step, two-hand start-up. ● One-button switching between single and two rubber sleeve functions (customizable).