Wire Processing and Electrical Installation Equipment

Automatic Spot Wrap Tape Wrapping Machine (1.5–10mm OD) EW-AT-101

Price of the selected optionon request
Delivery options

Description

Feature

● Dual Application Modes (Spot Wrap & Multi-Section Wrap): Switch seamlessly between single-point spot wrapping at connector transitions and sequential multi-section wrapping along the same bundle without re-tooling.

● 60% Cost Reduction vs. Heat Shrink Tubing: Eliminates diameter-specific tubing stock, heating equipment energy consumption, and thermal cool-down dwell time for dramatic cost savings.

● 1.8-Second Rapid Cycle Time (50 pcs/min): Automated tape feeding, rotation, wrapping, and cutting cycles boost throughput by 50% compared to manual hand wrapping.

● Pedal-Controlled Cycle Initiation: Hands-free foot pedal activation allows operators to use both hands for precise alignment of wire bundles and connector strain relief points.

● Dual-Model Tape Width Flexibility: Standard EW-AT-101 model handles 15–50 mm wide tape rolls, while the EW-AT-101-1 variant is specifically engineered for narrow 0–15 mm tape applications.

● Programmable Turn Count & Length: Easily adjust wrap rotation counts and feed lengths to maintain exact quality standards across PVC, flannel, and lacquer tape materials.

Application Range

● Automotive Harness Connector Transitions: Rapid spot-wrapping for strain relief, anti-vibration, and electrical isolation behind connector plugs.

● Electronic Lead & Sensor Assemblies: Precise multi-section spot taping on small-diameter cable branches (1.5–10 mm OD).

● Home Appliance Wiring Looms: Efficient bundling at specific junction points using PVC or flannel noise-reduction tape.

● High-Mix Harness Sub-Assembly Lines: Ideal replacement for heat shrink tube heating stations to eliminate thermal risk and thermal dwell bottlenecks.

Specifications

Model
EW-AT-101 | EW-AT-101 -1
Applicable tape
PVC, flannel tape, lacquer tape etc. | PVC, flannel tape, lacquer tape etc.
Application
Spot wrap, multi-section wrap | Spot wrap, multi-section wrap
Wrapping diameter
1.5 - 10 mm | 1.5 - 10 mm
Tape width
15 - 50 mm | 0 - 15 mm
Tape inner diameter
Customized | Customized
Tape feeding length
50 - 99 mm | Customized
Tape feeding mode
Manual (automatic feeding can be customized) | Manual (automatic feeding can be customized)
Productivity
50 pcs./min(~1.8 seconds/cycle) | 50 pcs./min(~1.8 seconds/cycle)
Compressed air input
0.4 - 0.6 MPa | 0.4 - 0.6 MPa
Control voltage
DC 24V / 68V | DC 24V / 68V
Power supply
110, 220 V | 110, 220 V
Power
600 W | 600 W
Weight
54 kg | 54 kg
Dimension
520 * 340 * 510 mm | 520 * 340 * 510 mm
Pedal
YES | YES
Application for Automatic Spot Wrap Tape Wrapping Machine (1.5–10mm OD) EW-AT-101